Difference between revisions of "PVD IS Head Tube"
From Pvdwiki
(→Finishing) |
(→Machining) |
||
| Line 12: | Line 12: | ||
===Machining=== | ===Machining=== | ||
| + | A bushing was required to hold the part during machining. | ||
| + | |||
===Finishing=== | ===Finishing=== | ||
Revision as of 23:41, 30 July 2007
Most framebuilders that work with steel have ignored the newer integrated headset design. I belive that it is the future. I decided to make up some very special head tubes for my bike projects.
Contents
Design
Stock
The 4130 stock required for this part is very rare. 1.750 OD x .250 Wall.
I ended up ordering the stock from Factory Steel and Metal Supply Co. out of Detroit, MI.
The price was $18.70 per foot with a $20 cut charge from 20 foot lengths. A six foot section should be enough to get 14 x 4.5" tubes.
Machining
A bushing was required to hold the part during machining.
