Difference between revisions of "PVD IS Head Tube"
From Pvdwiki
(→Finishing) |
(→Machining) |
||
| Line 13: | Line 13: | ||
===Machining=== | ===Machining=== | ||
A bushing was required to hold the part during machining. | A bushing was required to hold the part during machining. | ||
| + | |||
| + | [[Image:Is head tube 4.jpg]] | ||
===Finishing=== | ===Finishing=== | ||
Revision as of 17:24, 1 August 2007
Most framebuilders that work with steel have ignored the newer integrated headset design. I belive that it is the future. I decided to make up some very special head tubes for my bike projects.
Contents
Design
Stock
The 4130 stock required for this part is very rare. 1.750 OD x .250 Wall.
I ended up ordering the stock from Factory Steel and Metal Supply Co. out of Detroit, MI. EMJ Metals out of Freemont would be another good choice.
The price was $18.70 per foot with a $20 cut charge from 20 foot lengths. A six foot section should be enough to get 14 x 4.5" tubes.
Machining
A bushing was required to hold the part during machining.
Finishing
End Product
