Difference between revisions of "PVD Keg Trailer"
(→Tap and Pump) |
(→Construction) |
||
(20 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
36 spokes. Radial lace. | 36 spokes. Radial lace. | ||
+ | |||
+ | These wheels are ETRTO 451, not 406 as most 20" BMX wheels are. This created a huge problem with tires, setting me back a while. ETRTO 406 is what most 20" tires are. | ||
==Axles== | ==Axles== | ||
Line 17: | Line 19: | ||
Other keg brands: | Other keg brands: | ||
− | *Cornelius - [http://en.wikipedia.org/wiki/Cornelius_kegs Cornelius Kegs] | + | *Cornelius - [http://en.wikipedia.org/wiki/Cornelius_kegs Cornelius Kegs], [http://www.cornelius.com/ Cornelius Co.] |
− | *Firestone | + | *Firestone Steel Products Co./Spartanburg Stainless Steel Products Inc., Spartanburg, SC now part of [http://www.bc.franke.com/prospektdownload.htm Franke/Blefa] |
− | |||
*[http://www.aeb-kegs.com/ing/prodotti_aperti.htm A.E.B. S.R.L.] | *[http://www.aeb-kegs.com/ing/prodotti_aperti.htm A.E.B. S.R.L.] | ||
+ | *[http://www.schaefer-container-systems.de/keg-beverage-containers/beverage-containers.htm Schaefer Containter Systems], also [http://schaeferkegs.com/ Schaefer Kegs] | ||
+ | *[http://www.ecokeg.com/index_new.html EcoKeg] | ||
+ | *[http://www.thielmann.com/english/index.htm Thiemann] | ||
==Tap and Pump== | ==Tap and Pump== | ||
Line 26: | Line 30: | ||
[http://www.williamsbrewing.com/BALL_LOCK_INJECTOR_P84.cfm BALL LOCK INJECTOR] - $19.90 | [http://www.williamsbrewing.com/BALL_LOCK_INJECTOR_P84.cfm BALL LOCK INJECTOR] - $19.90 | ||
+ | |||
+ | These ball locks use 1/4" SAE 37° Flare (JIC) (7/16", NC UNF) fittings produced by [http://www.cmbecker.com/gb_product1.htm CMBecker of Germany] | ||
+ | |||
+ | Schrader Valve's Dimensions, External Thread | ||
+ | |||
+ | METRIC: 7.7 mm OD, thread root diameter is 6.9 mm x 0.794 mm pitch. | ||
+ | IMPERIAL: 0.305 in OD, thread root diameter 0.302 in x 32 tpi (threads per inch) | ||
[http://www.genuineinnovations.com/kegprods.aspx?prodid=1027 Genuine Innovations Cornelius Keg CO2 Charger] | [http://www.genuineinnovations.com/kegprods.aspx?prodid=1027 Genuine Innovations Cornelius Keg CO2 Charger] | ||
+ | |||
==CO2 Cartridges== | ==CO2 Cartridges== | ||
The injector will work with commonly available threaded CO2 cartridges. | The injector will work with commonly available threaded CO2 cartridges. | ||
− | These are very expensive at bike shops, upwards of $5 each for 16 gram units. | + | These are very expensive at bike shops, upwards of $5 each for 16 gram units. |
+ | |||
+ | 3/8-24UNF-1A thread. Note: Schreader valves are 5/16–32 thread. | ||
They can be got for much cheaper, the key is to ensure that the cartrige is made up of pure CO2: | They can be got for much cheaper, the key is to ensure that the cartrige is made up of pure CO2: | ||
− | [http://www.genuineinnovations.com/instructions/CompatibilityChart.pdf | + | [http://www.genuineinnovations.com/instructions/CompatibilityChart.pdf Genuine Innovations info] |
+ | |||
+ | [http://www.genuineinnovations.com/refills.aspx Genuine Innovations Refills] | ||
+ | |||
+ | [http://www.isinorthamerica.com/consumer/isi_beer.shtml ISI Cartridges], Not threaded. | ||
+ | |||
+ | |||
− | http://www. | + | [http://www.gas-depot.com/index.php?main_page=index&cPath=2 Gas Depot] chargers are made in asia by [http://www.twmosa.com/Product_Charger.asp Mosa] |
− | + | ||
+ | |||
+ | ===Sizes=== | ||
+ | *12g - 3.27” long x .74” diameter; 1.32oz | ||
+ | *16g - 3.49” long .87” diameter; 1.87oz | ||
+ | *25g - 4.22” long x 1.00” diameter; 3.22oz | ||
==Sanke & Comercial Keg Tap Info== | ==Sanke & Comercial Keg Tap Info== | ||
Line 54: | Line 79: | ||
==Insulation== | ==Insulation== | ||
− | Neoprene | + | Neoprene [http://40below.com/products_Results_brewingproducts.php?S_CategoryName=brewing_products Keg Parka] by [http://40below.com/ 40Below] with room for ice packs. |
[http://www.williamsbrewing.com/KEG_PARKA_2_5_TO_3_GALLON_P442C237.cfm KEG PARKA 2.5 TO 3 GALLON] - $26.90 | [http://www.williamsbrewing.com/KEG_PARKA_2_5_TO_3_GALLON_P442C237.cfm KEG PARKA 2.5 TO 3 GALLON] - $26.90 | ||
Line 69: | Line 94: | ||
==Fastening the Trailer to the Bike== | ==Fastening the Trailer to the Bike== | ||
[http://www.trail-a-bike.com/product/trail-a-bikes/original-folder-1/ Adams Trail-A-Bike Hitch] - Mounts to any seatpost and keeps the trailer tounge out of the way. | [http://www.trail-a-bike.com/product/trail-a-bikes/original-folder-1/ Adams Trail-A-Bike Hitch] - Mounts to any seatpost and keeps the trailer tounge out of the way. | ||
+ | ==Wheel Camber== | ||
+ | |||
+ | 0 wheel camber will be used. Typical wheelchair camber angles are 0, 3, 4, 8, 12 and 16 degrees. | ||
+ | |||
+ | http://www.usatechguide.org/articledisplay.php?artid=23 | ||
+ | |||
+ | http://www.rehab.research.va.gov/jour/89/26/2/pdf/Veeger.pdf | ||
+ | |||
+ | ==Construction== | ||
+ | |||
+ | [[Image:Kegtailer1.jpg]]<br> | ||
+ | [[Image:Kegtailer2.jpg]]<br> | ||
+ | [[Image:Kegtailer3.jpg]]<br> | ||
+ | [[Image:Kegtailer4.jpg]]<br> | ||
+ | [[Image:Keg trailer 5.jpg]]<br> | ||
+ | [[Image:Keg trailer 6.jpg]]<br> | ||
+ | |||
+ | [[Image:Keg trailer 7.jpg]]<br> | ||
+ | |||
+ | [[Image:Keg trailer 8.jpg]]<br> | ||
+ | |||
==Research== | ==Research== | ||
− | + | ===Trailer=== | |
http://www.tonystrailers.com/cargo/tp4.jpg | http://www.tonystrailers.com/cargo/tp4.jpg | ||
Line 96: | Line 142: | ||
http://justyna.typepad.com/photos/uncategorized/2007/10/09/p1000611.jpg | http://justyna.typepad.com/photos/uncategorized/2007/10/09/p1000611.jpg | ||
+ | |||
+ | ===Wheelchair=== | ||
+ | |||
+ | http://trekinetic.co.uk/vvwc.html | ||
[[category:Bicycle]] | [[category:Bicycle]] | ||
[[category:Frame Building]] | [[category:Frame Building]] |
Latest revision as of 23:18, 20 December 2007
Contents
Wheels
20" Sun L20 Single-Wall Wheelchair Wheels - $64.35 ea.
36 spokes. Radial lace.
These wheels are ETRTO 451, not 406 as most 20" BMX wheels are. This created a huge problem with tires, setting me back a while. ETRTO 406 is what most 20" tires are.
Axles
Edmond Wheelchair Repair and Supply
Preferably QR, waiting on wheels to know size.
Keg
2½ GALLON NEW BALL LOCK CORNELIUS TYPE KEG - $92.90
My partictular keg is a 2.5 gallon keg by AEB. 14½" tall, and 8½" wide.
Since the trailer should be capable of carrying a 5 gallon keg at some point, the max size should be 25" tall, and 8½" wide.
Other keg brands:
- Cornelius - Cornelius Kegs, Cornelius Co.
- Firestone Steel Products Co./Spartanburg Stainless Steel Products Inc., Spartanburg, SC now part of Franke/Blefa
- A.E.B. S.R.L.
- Schaefer Containter Systems, also Schaefer Kegs
- EcoKeg
- Thiemann
Tap and Pump
BALL-LOCK PICNIC TAP - $12.90
BALL LOCK INJECTOR - $19.90
These ball locks use 1/4" SAE 37° Flare (JIC) (7/16", NC UNF) fittings produced by CMBecker of Germany
Schrader Valve's Dimensions, External Thread
METRIC: 7.7 mm OD, thread root diameter is 6.9 mm x 0.794 mm pitch. IMPERIAL: 0.305 in OD, thread root diameter 0.302 in x 32 tpi (threads per inch)
Genuine Innovations Cornelius Keg CO2 Charger
CO2 Cartridges
The injector will work with commonly available threaded CO2 cartridges.
These are very expensive at bike shops, upwards of $5 each for 16 gram units.
3/8-24UNF-1A thread. Note: Schreader valves are 5/16–32 thread.
They can be got for much cheaper, the key is to ensure that the cartrige is made up of pure CO2:
ISI Cartridges, Not threaded.
Gas Depot chargers are made in asia by Mosa
Sizes
- 12g - 3.27” long x .74” diameter; 1.32oz
- 16g - 3.49” long .87” diameter; 1.87oz
- 25g - 4.22” long x 1.00” diameter; 3.22oz
Sanke & Comercial Keg Tap Info
This is the type used by most major brewers.
http://www.homebrewing.org/assets/images/PDF/kegcouplerlistpdf.pdf
http://www.homebrewing.org/Commercial-Couplers_c_92-1-0.html
http://www.stpats.com/index.htm
http://nbrewer.com/couplers.html
Insulation
Neoprene Keg Parka by 40Below with room for ice packs.
KEG PARKA 2.5 TO 3 GALLON - $26.90
Later, someone else can get one for the 5 gallon keg.
KEG PARKA 5 GALLON
http://www.foamorder.com/neoprene.html
Ice
Fastening the Trailer to the Bike
Adams Trail-A-Bike Hitch - Mounts to any seatpost and keeps the trailer tounge out of the way.
Wheel Camber
0 wheel camber will be used. Typical wheelchair camber angles are 0, 3, 4, 8, 12 and 16 degrees.
http://www.usatechguide.org/articledisplay.php?artid=23
http://www.rehab.research.va.gov/jour/89/26/2/pdf/Veeger.pdf
Construction
Research
Trailer
http://www.tonystrailers.com/cargo/tp4.jpg
http://www.tonystrailers.com/cargo/bp15.jpg
http://www.tonystrailers.com/cargo/adjustable.jpg
http://www.tonystrailers.com/graphics/page_pic_trailering_01.jpg
http://www.tonystrailers.com/graphics/razzle.jpg
http://www.carryfreedom.com/products.html
http://biketrailerblog.com/uploaded_images/topeak_trailer_kickstand-785567.jpg
http://biketrailerblog.com/uploaded_images/weber_monoporter-756187.jpg
http://bicyclebrothers.com/db5/00427/bicyclebrothers.com/_uimages/P3140026.JPG
http://bicyclebrothers.com/db5/00427/bicyclebrothers.com/_uimages/hitchdetail.bmp
http://bikecart.pedalpeople.com/gallery.html
http://www.bikesandtrailers.com/bike-trailers/index.html
http://justyna.typepad.com/photos/uncategorized/2007/10/09/p1000611.jpg