Difference between revisions of "Cannondale Headshok Information"
From Pvdwiki
(→Getting parts from an existing fork) |
(→OE Parts) |
||
| Line 1: | Line 1: | ||
==OE Parts== | ==OE Parts== | ||
| + | [[Image:Pvdheadshok-2.jpg]]<br><br> | ||
| + | The end is press-fit/glued into the fork. 1-9/32" shaft diameter. | ||
| + | [[Image:Pvdheadshok-2.jpg]]<br> | ||
===Components=== | ===Components=== | ||
*118455, Tele Assy, 80mm, Alum, LC, Honed- $70 | *118455, Tele Assy, 80mm, Alum, LC, Honed- $70 | ||
Revision as of 18:13, 19 March 2008
Contents
OE Parts
The end is press-fit/glued into the fork. 1-9/32" shaft diameter.
Components
- 118455, Tele Assy, 80mm, Alum, LC, Honed- $70
- KF263/, Kit, Damper, Green DLR80, Soft- $100 ($200 Retail)
- KF264/, Kit, Damper, Blue DLR80, Standard- $100 ($200 Retail)
- KF265/, Kit, Damper, Red DLR80, Firm- $100 ($200 Retail)
- HD191/BLK, Kit, Fork Boot, Slim 5 Ridge ($9.99 Retail)
- HD???/BLK, Kit, Fork Boot, Slim 2 Ridge ($9.99 Retail)
- 118738L negative spring (soft,green)
- 118739L negative spring (standard,blue)
- 118740L negative spring (firm,red)
Headsets and stems
A Cannondale headset and stem must be used with this fron end. The "steerer" diameter is 1.5625" not 1.500".
Tools
Headshok Cartridge (Castle) Tool - HDTL146/
Headshok ½” Shaft Clamp Tool - HDTL187/
Upper Bearing Driver - HDTL149/
Pin tool - HD136/
Loctite 262 - for plastic air piston threads Loctite 242 - for damper assembly threads
Recomended Air Pressure
Assembly Instructions
Grease and Oil
Factory Grease is Royal Purple Ultra Performance Grease NLGI #2 (ISO 46 BASE).
Headtube
Kirk Pacenti sell special headshok head tubes.
Getting parts from an existing fork
Bob Brown describes the process on one of the older steel stantion forks.
Magura Cartridge
http://www.magura.com/english/produkte_static/produkt_2008_ccs.htm
