Difference between revisions of "PVD Road Bike"
From Pvdwiki
(→Seatpost, Handlebar and Stem) |
(→Pictures) |
||
| (19 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | The Drama | ||
| + | |||
| + | A new road bike for me. My first new road bike in about 12 years. I wanted the bike to be modern, perform, and look fantastic. It looks fast standing still! | ||
| + | |||
| + | Sadly, two dramatic events went into the slow and painful course of this build. Firstly, I broke the first rev on the alignment table. Second, and more importantly, my wife decided to divorce me during this time. It was hard to focus on much and added a bunch of time to the build. Gladly, we are both still friends. | ||
| + | |||
==Tubes== | ==Tubes== | ||
| + | ===Initial Build=== | ||
* Down Tube - HOXPLAT07, 31.8mm, 620mm, 7/4/7 | * Down Tube - HOXPLAT07, 31.8mm, 620mm, 7/4/7 | ||
* Top Tube - HOXPLAT02, 25.4mm, 580mm, 7/4/7 | * Top Tube - HOXPLAT02, 25.4mm, 580mm, 7/4/7 | ||
| − | * Seat Tube - NOVA | + | * Seat Tube - NOVA External Butt Seat Tube, 28.6/30.0 X 520 [http://www.novacycles.com/catalog/product_info.php?cPath=35_51_269_276&products_id=1346 $15.25] |
| + | * Chain Stay, Drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, [http://www.novacycles.com/catalog/product_info.php?cPath=35_271_282_283&products_id=1393 $15.92ea], Bent 7.5 Degrees. | ||
| + | * Chain Stay, Non-drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, [http://www.novacycles.com/catalog/product_info.php?cPath=35_271_282_283&products_id=1393 $15.92ea], Bent 7.5 Degrees. | ||
* Seat Stay - TT1-SSX1C, 16mm to 11.25mm ST, 600mm, 0.6mm wall | * Seat Stay - TT1-SSX1C, 16mm to 11.25mm ST, 600mm, 0.6mm wall | ||
| − | |||
* Bottom Bracket - PVD Hollowtech II Shell, Road, 86.5mm wide x 1.75" Ø | * Bottom Bracket - PVD Hollowtech II Shell, Road, 86.5mm wide x 1.75" Ø | ||
| − | * Dropouts - Paragon Road | + | * Dropouts - 58 deg. Paragon Road |
* Braze-ons - Paragon | * Braze-ons - Paragon | ||
| + | ====Problems==== | ||
| + | [[Image:IMG 1650.jpg]]<br> | ||
| + | |||
| + | Broke the frame on the alignment table. This was due to drilling the waterbottle holes before aligning. I would not have done this, but I was killing some time while dealing with a different issue. | ||
| + | |||
| + | ===2nd, Revised Build=== | ||
| + | * Down Tube - Dedacciai DED-AMDT-969, 31.8mm, 650mm, 9/6/9, $16.85 | ||
| + | * Top Tube - Nova NOV-CRTT-858, 25.4mm, 600mm, 8/5/8, $10.70 | ||
| + | * Seat Stay - TT1-SSX1C, 16mm to 10.5mm, 560mm, 0.7mm wall, $15.25 | ||
| + | * Chain Stay, Drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, [http://www.novacycles.com/catalog/product_info.php?cPath=35_271_282_283&products_id=1393 $15.92ea], Bent 7.0 Degrees. | ||
| + | * Chain Stay, Non-drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, [http://www.novacycles.com/catalog/product_info.php?cPath=35_271_282_283&products_id=1393 $15.92ea], Bent 7.0 Degrees. | ||
| + | ==Head Tube== | ||
| + | [[Image:IMG 1652.jpg]]<br> | ||
| + | |||
| + | The new 3 peice head tube design. | ||
==Fork== | ==Fork== | ||
*[http://www.eastonbike.com/PRODUCTS/FORKS/fork_ec90_SL_'08.html Easton EC90 SLX] Integrated Curved fork. | *[http://www.eastonbike.com/PRODUCTS/FORKS/fork_ec90_SL_'08.html Easton EC90 SLX] Integrated Curved fork. | ||
| Line 31: | Line 54: | ||
==Seatpost, Handlebar and Stem== | ==Seatpost, Handlebar and Stem== | ||
| − | *Seatpost - [http://www.eastonbike.com/PRODUCTS/POSTS/post_ec90_zero.html Easton EC90 Zero Offset] | + | *Seatpost - [http://www.kalloyuno.com/productguizzo-2.htm#Seatposts Kalloy Guizzo SPC-100], 27.2mm (Option - [http://www.eastonbike.com/PRODUCTS/POSTS/post_ec90_zero.html Easton EC90 Zero Offset]) |
| − | *Handlebar - [http://road.fullspeedahead.com/fly.aspx?layout=product&taxid=222&pid=193 FSA K-Wing | + | *Saddle - [http://www.wtb.com/products/saddles/performance/laserv WTB Lazer V] |
| − | * | + | *Handlebar - [http://road.fullspeedahead.com/fly.aspx?layout=product&taxid=222&pid=193 FSA K-Wing Ergo], 31.8mm, 42cm x 145 drop x 90 reach |
| − | + | *Bar Tape - [http://www.fizik.it/catalog_accessories.aspx?subid=Bar_tape_ Fi'zi:k Microtex Synthetic], Black | |
| − | + | *Stem Options - [http://www.salsacycles.com/stems.html Salsa MOTO ACE™ S.U.L.™ STEM], 31.8mm, 115°, 100mm Length | |
| − | *Stem Options - [http://www.salsacycles.com/stems.html Salsa MOTO ACE™ S.U.L.™ STEM], 31.8mm, 115°, | + | *Headset - [http://www.canecreek.com/cane-creek-110-is-headset.html Cane Creek 110 IS], Black. |
| − | * | + | *Pedals - [http://bike.shimano.com/publish/content/global_cycle/en/us/index/products/pedals/road/product.-code-PD-A520.-type-pd_road.html Shimano PD-A520] |
| + | *Post Clamp - [http://www.salsacycles.com/skewers.html Salsa Lip-Lock], 30.0 | ||
==Parts Spec== | ==Parts Spec== | ||
| Line 43: | Line 67: | ||
*Front Wheel - 28 hole Dura-ace, 2 cross | *Front Wheel - 28 hole Dura-ace, 2 cross | ||
*Rear Wheel - 28 hole Dura-ace, 2 cross ND, 3 cross D | *Rear Wheel - 28 hole Dura-ace, 2 cross ND, 3 cross D | ||
| + | |||
| + | ==Paint== | ||
| + | |||
| + | Cheap powder coat. RAL #3004, Purple Red. | ||
| + | |||
| + | ==Weight== | ||
| + | 18.6 lbs. with 2 water bottle cages. | ||
| + | ==Fit== | ||
| + | I was fit on the bike at [http://www.wholeathlete.com/ Whole Athlete] ($220) in San Anselmo, CA. Dario seemed to do a great job. I'll spend a few weeks on the fit to decide. | ||
| + | |||
| + | [[Image:Pete's-Road-Bike-WA-Fit.gif]]<br> | ||
| + | |||
| + | ==Revision 2== | ||
| + | Designed to use a zero offset post and a 90mm, 10 degree Thomson stem. Very long steerer. | ||
| + | |||
| + | [[Image:PVD-Road-Bike-REV-2.gif]]<br> | ||
| + | |||
| + | ==Pictures== | ||
| + | |||
| + | [[Image:CIMG6415.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6417.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6419.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6421.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6423.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6424.jpg]]<br>Above, you can see some flux that was missed. That's what you get when you bargain shop paint.<br> | ||
| + | |||
| + | [[Image:CIMG6426.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6428.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6430.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6432.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6433.jpg]]<br><br> | ||
| + | |||
| + | [[Image:CIMG6435.jpg]]<br><br> | ||
| + | |||
| + | |||
| + | |||
[[category:Bicycle]] | [[category:Bicycle]] | ||
[[category:Frame Building]] | [[category:Frame Building]] | ||
Latest revision as of 20:21, 8 August 2008
The Drama
A new road bike for me. My first new road bike in about 12 years. I wanted the bike to be modern, perform, and look fantastic. It looks fast standing still!
Sadly, two dramatic events went into the slow and painful course of this build. Firstly, I broke the first rev on the alignment table. Second, and more importantly, my wife decided to divorce me during this time. It was hard to focus on much and added a bunch of time to the build. Gladly, we are both still friends.
Contents
Tubes
Initial Build
- Down Tube - HOXPLAT07, 31.8mm, 620mm, 7/4/7
- Top Tube - HOXPLAT02, 25.4mm, 580mm, 7/4/7
- Seat Tube - NOVA External Butt Seat Tube, 28.6/30.0 X 520 $15.25
- Chain Stay, Drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.5 Degrees.
- Chain Stay, Non-drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.5 Degrees.
- Seat Stay - TT1-SSX1C, 16mm to 11.25mm ST, 600mm, 0.6mm wall
- Bottom Bracket - PVD Hollowtech II Shell, Road, 86.5mm wide x 1.75" Ø
- Dropouts - 58 deg. Paragon Road
- Braze-ons - Paragon
Problems
Broke the frame on the alignment table. This was due to drilling the waterbottle holes before aligning. I would not have done this, but I was killing some time while dealing with a different issue.
2nd, Revised Build
- Down Tube - Dedacciai DED-AMDT-969, 31.8mm, 650mm, 9/6/9, $16.85
- Top Tube - Nova NOV-CRTT-858, 25.4mm, 600mm, 8/5/8, $10.70
- Seat Stay - TT1-SSX1C, 16mm to 10.5mm, 560mm, 0.7mm wall, $15.25
- Chain Stay, Drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.0 Degrees.
- Chain Stay, Non-drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.0 Degrees.
Head Tube
The new 3 peice head tube design.
Fork
- Easton EC90 SLX Integrated Curved fork.
- 365±1mm AC
- 43mm Offset
- 300mm Steerer
- Tech Bulletin
- Installation Instructions
Cable Routing
- Tradtional Road, under bottom bracket
- Shimano Dura-Ace Derailleur Cable Set, 1.2mm Cable & 4mm Housing
- Shimano Dura-Ace Brake Cable Set, 1.6mm Cable & 5mm Housing
- Shimano Mega 9 Barrel Adjuster Boot on Rear Derailure
- Shimano SP-18-T BB Cable Guide
- Shimano Sealed End Cap W/Tube and Shield, 4mm
Seatpost, Handlebar and Stem
- Seatpost - Kalloy Guizzo SPC-100, 27.2mm (Option - Easton EC90 Zero Offset)
- Saddle - WTB Lazer V
- Handlebar - FSA K-Wing Ergo, 31.8mm, 42cm x 145 drop x 90 reach
- Bar Tape - Fi'zi:k Microtex Synthetic, Black
- Stem Options - Salsa MOTO ACE™ S.U.L.™ STEM, 31.8mm, 115°, 100mm Length
- Headset - Cane Creek 110 IS, Black.
- Pedals - Shimano PD-A520
- Post Clamp - Salsa Lip-Lock, 30.0
Parts Spec
- Dura-Ace 10 speed all over.
- Front Wheel - 28 hole Dura-ace, 2 cross
- Rear Wheel - 28 hole Dura-ace, 2 cross ND, 3 cross D
Paint
Cheap powder coat. RAL #3004, Purple Red.
Weight
18.6 lbs. with 2 water bottle cages.
Fit
I was fit on the bike at Whole Athlete ($220) in San Anselmo, CA. Dario seemed to do a great job. I'll spend a few weeks on the fit to decide.
Revision 2
Designed to use a zero offset post and a 90mm, 10 degree Thomson stem. Very long steerer.
Pictures
Above, you can see some flux that was missed. That's what you get when you bargain shop paint.
