Difference between revisions of "PVD 5.5" Fork Hardtail"
From Pvdwiki
(→The Fork) |
(→The Tubes) |
||
| Line 15: | Line 15: | ||
*Seat Stays - DEDACCIAI 12.5 16mm X 0.6 SINGLE TAPER 560 $18.71 <br><br> | *Seat Stays - DEDACCIAI 12.5 16mm X 0.6 SINGLE TAPER 560 $18.71 <br><br> | ||
| − | * | + | *Independent Fabrications Dropouts (PVD Designed) |
*Paragon 1.5" BB Shell | *Paragon 1.5" BB Shell | ||
*Hydo Stops: Pacenti SS Stamped [http://www.bikelugs.com/productimages/STAINLESS%20HYDRO%20GUIDE.JPG Bikelugs.com] | *Hydo Stops: Pacenti SS Stamped [http://www.bikelugs.com/productimages/STAINLESS%20HYDRO%20GUIDE.JPG Bikelugs.com] | ||
Revision as of 16:53, 2 August 2007
The Print
The Fork
This bike is being designed for use with a Fox Float 140 (140mm) or a Rock Shox Revelation 426 Dual-Air (130mm)
Both forks have a 39mm offset and relatively the same axle to crown dimention (fully extended) of 510.9mm for the Float 140 and 508mm for the Revelation. Either fork should produce the same feel with the 71 degree head angle, 70mm of mechanical trail.
The Tubes
I'm keeping this bike cheap in case the geometry doesn't work out quite right.
- Down Tube - Nova 29er DT 35 x 8/5/8 $16.20
- Seat Tube - Columbus ZONA 28.6 X 8/6 X 635 $22.51
- Top Tube - Columbus NEURON 28.6 X 7/5/7 TT $20.00
- Chain Stays - NOVA CRMO 22MM OVAL 425 - 12 DEGREE BEND $18.50
- Seat Stays - DEDACCIAI 12.5 16mm X 0.6 SINGLE TAPER 560 $18.71
- Independent Fabrications Dropouts (PVD Designed)
- Paragon 1.5" BB Shell
- Hydo Stops: Pacenti SS Stamped Bikelugs.com
- PVD Integrated HS Head Tube
