Difference between revisions of "PVD Road Bike"

From Pvdwiki
Jump to: navigation, search
Line 1: Line 1:
 +
The Drama
 +
 +
A new road bike for me. My first new road bike in about 12 years. I wanted the bike to be modern, perform, and look fantastic. It looks fast standing still!
 +
 +
Sadly, two dramatic events went into the slow and painful course of this build. Firstly, I broke the first rev on the alignment table. Second, and more importantly, my wife decided to divorce me during this time. It was hard to focus on much and added a bunch of time to the build. Gladly, we are both still friends.
 +
 
==Tubes==
 
==Tubes==
 
===Initial Build===
 
===Initial Build===

Revision as of 18:55, 4 June 2008

The Drama

A new road bike for me. My first new road bike in about 12 years. I wanted the bike to be modern, perform, and look fantastic. It looks fast standing still!

Sadly, two dramatic events went into the slow and painful course of this build. Firstly, I broke the first rev on the alignment table. Second, and more importantly, my wife decided to divorce me during this time. It was hard to focus on much and added a bunch of time to the build. Gladly, we are both still friends.

Tubes

Initial Build

  • Down Tube - HOXPLAT07, 31.8mm, 620mm, 7/4/7
  • Top Tube - HOXPLAT02, 25.4mm, 580mm, 7/4/7
  • Seat Tube - NOVA External Butt Seat Tube, 28.6/30.0 X 520 $15.25
  • Chain Stay, Drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.5 Degrees.
  • Chain Stay, Non-drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.5 Degrees.
  • Seat Stay - TT1-SSX1C, 16mm to 11.25mm ST, 600mm, 0.6mm wall
  • Bottom Bracket - PVD Hollowtech II Shell, Road, 86.5mm wide x 1.75" Ø
  • Dropouts - 58 deg. Paragon Road
  • Braze-ons - Paragon

Problems

IMG 1650.jpg

Broke the frame on the alignment table. This was due to drilling the waterbottle holes before aligning. I would not have done this, but I was killing some time while dealing with a different issue.

2nd, Revised Build

  • Down Tube - Dedacciai DED-AMDT-969, 31.8mm, 650mm, 9/6/9, $16.85
  • Top Tube - Nova NOV-CRTT-858, 25.4mm, 600mm, 8/5/8, $10.70
  • Seat Stay - TT1-SSX1C, 16mm to 10.5mm, 560mm, 0.7mm wall, $15.25
  • Chain Stay, Drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.0 Degrees.
  • Chain Stay, Non-drive - Dedacciai CRMO Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.0 Degrees.

Head Tube

IMG 1652.jpg

The new 3 peice head tube design.

Fork

Print

PVD-Road-Bike.gif

Cable Routing

  • Tradtional Road, under bottom bracket
  • Shimano Dura-Ace Derailleur Cable Set, 1.2mm Cable & 4mm Housing
  • Shimano Dura-Ace Brake Cable Set, 1.6mm Cable & 5mm Housing
  • Shimano Mega 9 Barrel Adjuster Boot on Rear Derailure
  • Shimano SP-18-T BB Cable Guide
  • Shimano Sealed End Cap W/Tube and Shield, 4mm

Seatpost, Handlebar and Stem

Some inexpensive stem and bar options will be used to finalize sizing:

Parts Spec

  • Dura-Ace 10 speed all over.
  • Front Wheel - 28 hole Dura-ace, 2 cross
  • Rear Wheel - 28 hole Dura-ace, 2 cross ND, 3 cross D

Paint

Cheap powder coat. RAL #3004, Purple Red.

Pictures

CIMG6415.jpg

CIMG6417.jpg

CIMG6419.jpg

CIMG6421.jpg

CIMG6423.jpg

CIMG6424.jpg

CIMG6426.jpg

CIMG6428.jpg

CIMG6430.jpg

CIMG6432.jpg

CIMG6433.jpg

CIMG6435.jpg