Difference between revisions of "PVD WarBird SS"
| Line 1: | Line 1: | ||
| − | This is a highly custom singlespeed bike built for | + | This is a highly custom singlespeed bike built for me. The goal was to try a slightly different fit geometry that would place slightly more weight on my front wheel than I usually do on my trail bikes.I also built this bike around a 100mm travel fork rather than the usual 140mm. The bike is also built to ride quite low for racing. |
| − | |||
| − | |||
==Tubes== | ==Tubes== | ||
| − | + | Cheap tubes. | |
* Down Tube - NOV_CODT_35_858 Nova 29er DT 35 x 8/5/8 x 750 | * Down Tube - NOV_CODT_35_858 Nova 29er DT 35 x 8/5/8 x 750 | ||
| Line 11: | Line 9: | ||
* Seat Stay - DED_AMSS_16ST_.7CRMO 16mm X 0.7 SINGLE TAPER 560 | * Seat Stay - DED_AMSS_16ST_.7CRMO 16mm X 0.7 SINGLE TAPER 560 | ||
* Chain Stays - NOV_CXCS_OVST_9/6NOVA ROAD OVERSIZE CHAINSTAYS 24mm OVAL .9/.6 WALL | * Chain Stays - NOV_CXCS_OVST_9/6NOVA ROAD OVERSIZE CHAINSTAYS 24mm OVAL .9/.6 WALL | ||
| − | * Bottom Bracket - PVD Hollowtech II Shell, | + | * Bottom Bracket - PVD Hollowtech II Shell, asym MTB, 92mm wide x 1.75" Ø |
* Dropouts - Paragon Light Slider | * Dropouts - Paragon Light Slider | ||
* Braze-ons - Pacenti Hydro | * Braze-ons - Pacenti Hydro | ||
==Fork== | ==Fork== | ||
| + | |||
| + | PVD segmented integrated fork. | ||
| + | |||
| + | During most riding a RS Revelation 100mm fork will be used. | ||
==Stem== | ==Stem== | ||
| + | |||
| + | PVD Custom integrated stem. | ||
| + | |||
| + | ==TruVativ HammerSchmidt?== | ||
| + | This bike was designed with clearance so that a TruVativ HammerSchmidt crank can be used. One issue is that that system to date uses a threaded bb. Since this bike is press fit, I will have to fabricate my own bb system to mount the crank. | ||
==Print== | ==Print== | ||
| Line 23: | Line 30: | ||
==Paint== | ==Paint== | ||
| − | + | Green | |
RAL #5012 | RAL #5012 | ||
Revision as of 16:18, 6 February 2010
This is a highly custom singlespeed bike built for me. The goal was to try a slightly different fit geometry that would place slightly more weight on my front wheel than I usually do on my trail bikes.I also built this bike around a 100mm travel fork rather than the usual 140mm. The bike is also built to ride quite low for racing.
Contents
Tubes
Cheap tubes.
- Down Tube - NOV_CODT_35_858 Nova 29er DT 35 x 8/5/8 x 750
- Top Tube - NOV_CRDT_858_650 NOVA CRMO 28.6 X 8/5/8 DT/TT
- Seat Tube - Nova CMST 460, External Butt Seat Tube, 28.6/30.0 X 460
- Seat Stay - DED_AMSS_16ST_.7CRMO 16mm X 0.7 SINGLE TAPER 560
- Chain Stays - NOV_CXCS_OVST_9/6NOVA ROAD OVERSIZE CHAINSTAYS 24mm OVAL .9/.6 WALL
- Bottom Bracket - PVD Hollowtech II Shell, asym MTB, 92mm wide x 1.75" Ø
- Dropouts - Paragon Light Slider
- Braze-ons - Pacenti Hydro
Fork
PVD segmented integrated fork.
During most riding a RS Revelation 100mm fork will be used.
Stem
PVD Custom integrated stem.
TruVativ HammerSchmidt?
This bike was designed with clearance so that a TruVativ HammerSchmidt crank can be used. One issue is that that system to date uses a threaded bb. Since this bike is press fit, I will have to fabricate my own bb system to mount the crank.
Paint
Green
RAL #5012
Parts Spec
- Shimano FC-M815-1 Saint Cranks, 175mm
- Shimano M810 Saint Brakeset
- Shimano XT 180mm Front Rotor
- Hope 140mm Rear Rotor.
- Shimano HB-M975 XTR, 9mm QR Front Hub, 32 hole
- Hadley Single Speed Rear Hub, 10mm TA, 32 hole
- Mavic XM819 UST Rims
- FSA Press fit BB
- Chris King 19 Tooth Cog
- Race Face DH Ring, 32 Tooth
- Race Face Light Bash Ring
- Cane Creek Head Bearings
- Kenda Nevegal 2.1" UST Tires
- Truvative World Cup Straight Handlebars
- ODI Rouge Grips
- WTB Silverado Saddle
- Easton EA90 Zero Offset Seatpost
- Salsa Seatpost Binder
- Shimano Deore XT SPD Pedals
Weight
Bike -
Gearing
I want to try a 2x2 setup. This is a single speed setup that allows a gear change by moving the chain to an alternate gearing latterally.
An offroad gear of 34/19 (148.5") with 94 chain links has two options for road/traverse gear are 36/17 (175.7", shortest ctc) and 38/14 (225.3", longest ctc).
