Difference between revisions of "Choosing a Small Sprocket"
From Pvdwiki
| Line 10: | Line 10: | ||
[[Image:Cog-Variance-from-round.gif]]<br> | [[Image:Cog-Variance-from-round.gif]]<br> | ||
| + | |||
| + | |||
| + | For comparison purposes, here are many of the common bicycle and motorcycle sprockets. | ||
| + | |||
| + | [[Image:Cog-Variance-from-round-all.gif]]<br> | ||
[[category:Bicycle]] | [[category:Bicycle]] | ||
Revision as of 17:22, 27 October 2007
Chain Sprockets are effectively regular polygons. Because of this, when the small sprocket is pulling the chain a pulse is created in the system.
It is important not to choose a sprocket too small for the smoothest power transfer.
Most engineering manuals suggest that 17 teeth be a minimum for high speed systems.
This graph shows how the lower leverage postion compares to the higher leverage postion as the sprocket rotates. (pitch /(2*TAN(PI()/ teeth ))) / (pitch /(2*SIN(PI()/ teeth )))
For comparison purposes, here are many of the common bicycle and motorcycle sprockets.
