PVD Mary's Trail Bike

Mary gave me a PowerTap SL hub for my fit bike. I promised her a nice hardtail trail frame in return. The fit was made from the calfee/mikkleson fit cycle that I just got.

Mary still rides quite light (beginner) on her bike. I'm going to lower the chassis slightly and keep the tubes very thin.

Print

Tubes

• Down Tube - 1.375 - True Temper HOXPLAT09, 691, 7/4/7, 89/51/423/38/90
• Top Tube - 1.125 - True Temper HOXPLAT04 620, 7/4/7, 76/51/365/38/90
• Seat Tube - NOVA External Butt Seat Tube, 28.6/30.0 X 460 $15.25
• Chain Stay, Drive - Dedacciai CRMO MTB 24mm Chainstay, 16/30 OVAL, 12 Degree bend, Modified PVD bend.
• Chain Stay, Non-drive - Dedacciai COM12.5 Road 24mm Chainstay, 16/30 OVAL, Straight, $15.92ea, Bent 7.5 Degrees.
• Seat Stays - True Temper HOXRCXSS 600, 16mm to 10mm, 0.61mm wall
• Bottom Bracket - PVD Hollowtech II Shell, MTB, 92mm wide x 1.75" Ø
• Dropouts - PVD Designed IF Dropouts
• Braze-ons - Pacenti Hydro
• DM Front Derailure Boss - PVD Machined
• Headtube - PVD Design, 144mm

Paint

She want's something that sparkles like glitter. I'm going to have her call Sycip or Spectrum for this.

Parts Spec

• RS Revalation 140mm Fork
• Shimano XT cranks & deraillures
• 24 tooth granny gear replacing 22 tooth for perfect shifting patterns
• Shimano Deore XT Brakes, pedals, cassette (11-32), and shiters
• Shimano Dura-ace 10spd chain
• 10 Degree x 70mm stem
• Cane Creek IS headset
• Kalloy Guzzio 0mm offset seatpost
• WTB Rocket V saddle
• Kenda Nevegal 2.1 UST tires
• Shimano XT Hubs on Mavic 819 rims, DT 1.8/1.6/1.8 spokes, Alloy nipples, 32 hole 3 cross
• Shimano XT Rotors. 180mm front, 140mm rear
• Truvativ Stylo, 700mm x 10 deg. Straight handlebar, Cut to 26"
• ODI Lock-on grips, Rouge
• Salsa 30mm seat post binder