Shimming Eccentric Bottom Brackets
From Pvdwiki
Recently, I put together a 17" 2006 Zion 660EBB Singlespeed frame.
It has an eccentric bottom bracket with dual locking set screws.
Hardware Replacement
The two round head cap screws were replaced with Stainless Steel Cap screws for use with a larger wrench and matirial to grab in a worst-case situation. Now a 5mm allen wrench can be used.
Greasing and Installing
Marine Grease. Use marine grease. Its what I use when reaming bottoms.
Test fitting.
I also need to find a way to rust proof the edges.
Park SPA-2 tool is used to roll the cam.
Proudly made in Taiwan.
