Bicycle Fitting and Sizing
From Pvdwiki
Contents
Why Fit
Different Philosophies
Serotta
Serotta has been a leader in bicycle fit for quite a while. The established the Serrotta Cycling Institute to further the goals of a better understanding of bike fit.
Fit Bikes
- Calfee Sizer Cycle
- Serotta Fit Bike
- San Giorgio Fig Jig
Kits
Local Fitters
- NorCal Cycling in Santa Rosa. $75. They do a pretty good job. Much better than the average bike shop in the bay area. This is where I send most people that need a basic fitting.
- Whole Athelete, San Anselmo, CA, $220-295
- Craig Upton of Performance Lab HC , $150
- PK Racing, in Fairfax. $450-500. Primarily pro road/tri experts. They are very expensive and I have no personal experience with them other than the fact that they are only 3 blocks from my house.
- Cycle Sport, in Oakland. $125
or search Serotta by zip code
Links
- Jack's Bikes - A fit kit walk through
- Cyclemetrics link page
Some Traditional Numbers
Crank Length
18.5% from top of femur to floor.
- Inseam to 31 inches: 170 mm.
- Inseam 31 to 33 inches: 172.5 mm.
- Inseam 33 or more inches: 175 mm.
Knee Angle
30-35 Degrees. More bend conserves more energy, less bend for more power.
Saddle Height
Inseam x 0.883 = Top of the saddle to the center of the bottom bracket.
Trunk Angle
About 30-40 degrees from level. (45 at most)
Shoulder Angle
90-100 degrees.
Elbow Bend
15 degrees
Stem Length
When in drops, axle obscured by bars.
