Cane Creek Double Barrel (TTX) Shock
Contents
The Unit
2009 Cane Creek Double Barrel. #C6857. 10.5" ete, 3.5" Stroke.
Images
Comparision to Manitou
Cane Creek Info
http://www.canecreek.com/component-shocks?product=double-barrel
http://www.canecreek.com/component-shocks?product=db-perfection
http://www.canecreek.com/component-shocks?product=db-sizes-weights
http://www.canecreek.com/tech-shocks?view=db-faqs
http://www.canecreek.com/manuals/Shock_Instructions/Double_Barrel/Double_Barrel_Instructions.pdf
http://www.canecreek.com/manuals/db_worksheet_2008_08_11.pdf
Dyno Chart
This is just awesome. Not only does Cane Creek supply this to customers, but it also shows just how incredible this damper is.
Springs
- 350x3.5
- 400x3.5
- 450x3.5 (currently used)
I'm not very happy with the quality of these springs. They are not very true accross the usable range. The rates vary from 91% to 107% of labled rate. Not great by motorsport standards (within 2%) but better than what Fox clams as their tolerance (15%). Here is a dynamic rating of some motorsport springs: http://pvdwiki.com/index.php?title=Springs#All_springs_are_progressive
Comparing Delrin End caps to Without
Spring Rating Setup
End Bearings
Bearings are marked as a Glacier Garlock product #K7A. 0.500" ID, 0.625" OD, 0.500" LG.
The bearings are a very light slip fit. Mine needed to be held in place using retaining compound, Loctite #680. "Slip fit"
PVD Spring Retainers & Reducers
