Difference between revisions of "Intense M6 DH Bike"
From Pvdwiki
(→Spring) |
(→Specs) |
||
| Line 5: | Line 5: | ||
*8" front rotor | *8" front rotor | ||
*7" rear rotor | *7" rear rotor | ||
| + | ==Gearing== | ||
| + | The bike is currently geared with a 32 tooth chainring and an 11-32 9 speed cassette. This is so that I can actually (Ha! The pain.) ride the bike on some of my local trails. I will bring that up to 36 tooth chainring for chairlifting. | ||
| + | |||
| + | A 36 chainring is a little low for a real DH bike, but since I'm not racing I figure that the lower gear will help me quite a bit when traversing to fun trails away from the lifts. | ||
| + | |||
==Shock & Spring== | ==Shock & Spring== | ||
===Shock=== | ===Shock=== | ||
Revision as of 15:56, 11 June 2008
Specs
- 8" travel front
- 10" travel rear
- IGCG-05 Guide Mount
- 8" front rotor
- 7" rear rotor
Gearing
The bike is currently geared with a 32 tooth chainring and an 11-32 9 speed cassette. This is so that I can actually (Ha! The pain.) ride the bike on some of my local trails. I will bring that up to 36 tooth chainring for chairlifting.
A 36 chainring is a little low for a real DH bike, but since I'm not racing I figure that the lower gear will help me quite a bit when traversing to fun trails away from the lifts.
Shock & Spring
Shock
- Labled "???????????"
- ???mm eye to eye
- 75mm visable stroke above bump stop
- 15mm bump stop. (not all possible)
Spring
- Labled "Manitou 350x3.5"
- 193mm Free Length
- 36mm ID
- 54mm OD
- 351 lbs/in measured rate of first inch.
Shock Reducers
- Top Spacing - 40mm
- Lower Spacing - 1.3125"
- 0.500" Busing width
- 12mm Bushing Bore
- 8mm Thru bolts
- 0.625" Shoulder
Weight
39.9 lbs before real chain guide. Waiting for part.
Pics
