Intense M6 DH Bike

Specs

• 2008 Intense M6, Medium
• 8" travel front
• 10" travel rear
• IGCG-05 Guide Mount
• 8" front rotor
• 7" rear rotor

Gearing

The bike is currently geared with a 32 tooth chainring and an 11-32 9 speed cassette. This is so that I can actually (Ha! The pain.) ride the bike on some of my local trails. I will bring that up to 36 tooth chainring for chairlifting.

A 36 chainring is a little low for a real DH bike, but since I'm not racing I figure that the lower gear will help me quite a bit when traversing to fun trails away from the lifts.

Crank Length

I got a good deal at a local swap for some 175mm and 165mm Saint cranks (83mm BB). The 175mm cranks are just too long. I wish that I had some 170mm cranks to try. I'm sure that the 165mm cranks will be nice when I'm going big.

Shock & Spring

Shock

• Labled "Manitou SFS Intrinsic - Revox ISX"
• 267mm (10.50") eye to eye
• 90mm (3.50") stroke
• 15mm bump stop
• Product web page
• Service Guide

Spring

• Labled "Manitou 350x3.5"
• 193mm Free Length (Max preload 8mm or 185mm length)
• 36mm ID
• 54mm OD
• 351 lbs/in measured rate of first inch.

Shock Reducers

• Top Spacing - 40mm
• Lower Spacing - 1.3125"
• 0.500" Busing width
• 12mm Bushing Bore
• 8mm Thru bolts
• 0.625" Shoulder

Weight

39.9 lbs before real chain guide. Waiting for part.

Pics